Notice: Undefined offset: 1 in /home/jackycho/public_html/hungtatester.com/wp-content/themes/replete/framework/php/function-set-avia-frontend.php on line 1015

Charpy Impact Testing Machine
ASTM D-256, JIS K-7111, K-6911, K-6743, CNS-10425, B7255
This tester is used to determine the energy required to break plastics, composites, and metallic materials. A notch is made at the center of a rectangular standard test specimen. Both ends are used as supports. Impact force is applied by releasing the pendulum. The energy required to break a specimen is calculated by the angle which the specimen swings up corresponding to the residual energy.
Optional Accessories
1. Automatic pendulum lift system
2. HT-9635S LCD indicator
3. Computer system

Modle HT-8041A
description HC-50 HC-30 HC-10 HC-5
Capacity 500 J 300 J 100 J 50 J
Capacity 50 kgf-M 30 kgf-M 10 kgf-M 5 kgf-M
Distance between center of
hammer revolving axis and
strike point (mm)
850 750 600 600
Radius of hammer knife edge 2 2 2 2
Angle of hammer knife edge 30° 30° 30° 30°
Lift of hammer (approx) 140° 140° 140° 130°
Weight of hammer
(approx/kgs)
37 26 11 8
Speed of hammer at impact
point (m/sec)(approx)
5.5 5 4.5 4.2
Dimensions WxDxH
(cm/approx)
50x110x44 46x88x130 39x75x110 39x75x110
Weight (kg/approx) 400 300 250 200
Modle HT-8041A
description HC-15 HC-1.0 HC-0.5 HC-0.3 HC-0.2
Capacity 15 J 10 J 5 J 3 J 2 J
Capacity 150 kg-cm 100 kg-cm 50 kg-cm 30 kg-cm 20 kg-cm
Distance between center of
hammer revolving axis and
strike point (mm)
400 400 230 230 230
Radius of hammer knife edge 2 2 2 2 2
Angle of hammer knife edge 30° 30° 30° 30° 30°
Lift of hammer (approx) 150° 150° 150° 150° 150°
Weight of hammer
(approx/kgs)
2.6 1.8 1.3 1.3 1.3
Speed of hammer at impact
point (m/sec)(approx)
3.8 3.8 2.9 2.9 2.9
Dimensions WxDxH
(cm/approx)
38x58x79 38x58x79 28x40x56 28x40x56 28x40x56
Weight (kg/approx) 70 65 50 50 50
© Copyright - Hungtatester