Notice: Undefined offset: 1 in /home/jackycho/public_html/hungtatester.com/wp-content/themes/replete/framework/php/function-set-avia-frontend.php on line 1015

 

Model HT-2328, HT-2328BP, HT-2328BI
Capacity kN 2 1 0.5 0.2 0.1
Standard-accuracy type Accuracy of test force is better than ±1% within the range 1/1~1/50 of full scale of load cell
Unit Load cell HT-8336 High precision tension/compression load cell as standard (maximum force x 1set, with excellent expanding feature, available to connect some load cells at a time – optional)
Load amplification Type HT-2328 equipped with HUNG TA interface system, available with: (A,B select one)
(A) x1, x2, x5, x10, x20, x50, x100 seven scales with auto range function,resolution 1/2000
(B) x1, x2, x5, x10 four scales with auto range function, resolution 1/20000
Type HT-2328AP, HT-2328AI Equipped with HT-2010 control indicator, available with x1, x2, x5, x10
four scales with auto range function, resolution 1/20000
Test speed range (select one) A: Servo motor type: 0.005~1000 mm/min
(Suitable for HT-2328 only)
B: Servo motor type: 0.05~1000 mm/min
(Suitable for HT-2328BP only)
C: DC motor type : 10~500 mm/min
(Suitable for HT-2328BP only)
D: DC motor type : 10~1000 mm/min
(Suitable for HT-2328BP only)
E: DC motor type : 0.5~1000 mm/min
(Suitable for HT-2328 only)
F: DC motor type : 100~1000 mm/min
Effective test depth 125 mm (distance of clamping center to column side)
Crosshead working table distance standard type: 750 mm / special type: 1150 mm
Test stroke (equipped with standard tensile grips) standard type: 560 mm / special type: 960 mm
Over-travel & Overload protection function Stroke up & down position protection setting, when test force exceeds 10% of full scale, system auto stop to protection the system from overloaded.
Power Consumption 0.5 kVA
Power source 1ø, 220 VAC, 50/60 Hz
Dimensions Console (WxDxH) standard type: 56x50x126 cm / special type: 56x50x166 cm
Unit 100x48x42 cm (computer hardware + monitor + printer)
Console standard type:54 kg / special type: 60 kg
Standard accessories Tensile grips x 1set, tool kit x 1set, operation manual x 1set, certificate of calibration x 1set
© Copyright - Hungtatester