CV-R190

SURFACE FINISH TESTER CV-R190 ™

Simple to operate, high quality universal surface finish tester

Simple but high quality universal roughness tester with excellent price/ quality rating
Tester for use in laboratory or production environment
Multiple styli available;
standard delivery with long and short stylus
Additional roughness parameters available on request
Conforms to international standards ISO, DIN, ASME, JIS

Technical specifications		Standard delivery Main unit Tracer unit including 2 styli Granite base including column Universal worktable Control box and drive box Standard roughness plate V-block large (90mm x 60mm x 40mm 45°) from 4mm - 60mm V-block small (40mm x 30mm x 20mm 45°) from 2mm - 20mm incl. magnetic surface Connection wires PCI i/o controller including software and wires CV Instruments certificate Installation & user manual Optional accessories Various styli for different applications Additional roughness parameters Optional Pentium 4 english workstation with hardware and software pre installed
Measuring System	Skidless method using inductive pick-up with
	interchangeable stylus
Measurement parameter	Ra; Rz; Rt; Rp; Rv; Rq; RSm; RmaxD; Material ratio curve
Measurable roughness range	Ra 0.01~10痠
Cut off (L)	0.08mm; 0.25mm; 0.8mm; 2.5mm
Evaluation length (LN)	1L; 2L; 3L; 4L; 5L
Filter
Measuring length	Horizontal 60mm (vertical 0,6mm / 600痠)
Resolution	0,001痠
Indication error	Not greater than 6% ?,004痠
Tracing speed	0,5mm/sec
Stylus	R= 2痠
Stylus force	0.7mN
Stylus 1 (standard)	For roughness test on plane and round surfaces and in
	bores from 10mm diameter, max bore depth= 18mm
Stylus 2	For roughness test on plane surfaces, and in bores from 4mm
	diameter, max. bore depth= 15mm
Worktable
Rotation range	360蚓
Inclination range	?0蚓
X - Y range	15mm
Unit height:	115mm
Tracer unit
Tracer height from granite surface	Min:100mm - max: 380mm
Inclination	?0蚓
Dimensions
Granite base	630mm x 400mm x 100mm
Column height	500mm
Control box	360mm x 100mm x 80mm
Power supply	220V, 50Hz