SURFACE FINISH PICK-UPS™
A-series for CV-R160 and CV-R170 (exchangeable)
| Pick-up body | |||||
| Type: PU-A (normal force) | Pick-up body not including stylus arm and nose piece | ||||
| Type: PU-A2 (low force) | Pick-up body not including stylus arm and nose piece | ||||
| Stylus arms ( ) = low force to be
used with body PU-A2 |
|||||
| Type: AA2 Radius: 2µm Force: 4mN (0.7mN) Nose pc: ANA/ANH Range: 600µm Use: General use Normal bore |
 |
Type: AA5 Radius: 5µm Force: 4mN (0.7mN) Nose pc: ANA/ANH Range: 600µm Use: General use Normal bore |
|
||
| Type: AC5 Radius: 5µm Force: 4mN (0.7mN) Nose pc: ANA/ANH Range: 600µm Use: Knife edge Very small wire |
 |
Type: AG5 Radius: 5µm Force: 4mN (0.7mN) Nose pc: ANG/ANH Range: 600µm Use: Curve surface Deep groves |
 |
||
| Type: AI5 Radius: 5µm Force: 4mN (0.7mN) Nose pc: ANH Range: 600µm Use: Small bore |
 |
Type: AL10 Radius: 5µm Force: 8mN (5mN) Nose pc: ANL/ANH Range: 1200µm Use: Long bore |
 |
||
 |
|||||
| Nose pieces |
|||||
| Type: ANA R40mmxR2mm Skid General use |
 |
 |
Type: ANG R0.5mm Skid Curve/Groove |
 |
 |
| Type: ANH Skidless measurement without Skid |
|
 |
Type: ANK R40mm Skid Corner end |
 |
|
| Type: ANL R40mmxR2mm Skid Long bore |
 |
|
|||
