HOME
FAQ
CONTACT

IMPACT DEVICES FOR SPECIAL APPLICATIONS™

Hardness testing devices for model IPX-330

 

 
Impact
Body D		 Impact
body G		 Impact Device D
Special feature:
Universal standard unit.
Application:
For the majority of
hardness testing assignments.		 Impact Device C
Special feature:
Reduced impact energy (approximately 1/4 of type D).
Application:
Surface hardened components, coatings, thin walled or impact sensitive components (small measuring indentation).		 Impact Device DC
Special feature:
Extremely short impact device. Spring loaded with a special loading stick. Otherwise as for
type D.
Application:
Use in very confined spaces, e.g. in holes, cylinders or for internal measurements on assembled machines.		 Impact Device D+15
Special feature:
Particularly slim front section and with measuring coil moved back.
Application:
Hardness measurements in grooves and on recessed surfaces.		 Impact Device DL
Special feature:
Needle front section diameter 4.2mm,
ength 50mm.
Application:
Measurements in extremely confined spaces		 Impact
Device G
   
   

Impact Device E
Special feature:
Synthetic diamond test tip (approximately 5000 HV).
Application:
For measurements in the extremely high hardness range (always in excess of 50 HRC/650 HV). Tool steels with high carbide content inclusions.
For measurements up to 1200 HV.


Impact Device G
Special feature:
Enlarged test tip, increased impact energy (approxmately 9 times that of type D) Low demands on measuring surface finish. For measurements in the Brinell range only
(max. 650 HB)
Application:
Solid components, e.g. heavy castings and forgings.