700 SERIES STEEL GAUGE BLOCKS
Standard: DIN 861

• Made from high quality stress relieved alloy steel
• Hardened to HV820 (HRC65)
• Excellent rigidity
• Size and serial number are engraved on each individual gauge block
• Available in 3 grades:
  - Grade 0 for calibration
  - Grade 1 for inspection
  - Grade 2 for workshop
• All sets have a MOORE & WRIGHT certificate
• All sets can be issued with a UKAS certificate at extra cost

 

 

Code no.	Grade	No. blocks	Nominal size	Quantity	Step (mm)
MW700-01	0	103	1.005	1	-
MW700-02	1		1.01 - 1.49	49	0.01
MW700-03	2		0.50 - 24.50	49	0.5
			25.0 - 100.0	4	25
MW700-04	0	87	1.001 - 1.009	9	0.001
MW700-05	1		1.01 - 1.49	49	0.01
MW700-06	2		0.50 - 9.50	19	0.5
			10.0 - 100.0	10	10

Code no.	Grade	No. blocks	Nominal size	Quantity	Step (mm)
MW700-07	0	47	1.005	1	-
MW700-08	1		1.01 - 1.09	9	0.01
MW700-09	2		1.10 - 1.90	9	0.1
			1.0 - 24.0	24	1
			25.0 - 100.0	4	25
MW700-10	0	32	1.005	1	-
MW700-11	1		1.01 - 1.09	9	0.01
MW700-12	2		1.10 - 1.90	9	0.1
			1.0 - 9.0	9	1
			10.0 - 30.0	3	10
			60	1	-

 

CERAMIC GAUGE BLOCKS 705 SERIES

Standard: DIN 861

• Made from very though Zirconia Ceramic with high precision
• Service life is up to 10 times that of steel
• Hardened to HV1350
• Thermal expension 11.5 x 10-6/K
• No requirements for anti corrosion treatment
• No effects resulting from hand contact
• Antimagnetic, anti-static, and non-conductive properties
• Excellent wringability due to microlite material
  n Every gauge block has its own serial number
• Available in 3 grades:
  - Grade 0 for calibration
  - Grade 1 for inspection
  - Grade 2 for workshop
• All sets have a MOORE & WRIGHT certificate
• All sets can be issued with a UKAS certificate at extra cost

Code no.	Grade	No. blocks	Nominal size	Quantity	Step (mm)
MW705-01	0	103	1.005	1	-
MW705-02	1		1.01 - 1.49	49	0.01
			0.50 - 24.50	49	0.5
			25.0 - 100.0	4	25
MW705-04	0	87	1.001 - 1.009	9	0.001
MW705-05	1		1.01 - 1.49	49	0.01
			0.50 - 9.50	19	0.5
			10.0 - 100.0	10	10

 

Code no.	Grade	No. blocks	Nominal size	Quantity	Step (mm)
MW705-07	0	47	1.005	1	-
MW705-08	1		1.01 - 1.09	9	0.01
			1.10 - 1.90	9	0.1
			1.0 - 24.0	24	1
			25.0 - 100.0	4	25
MW705-10	0	32	1.005	1	-
MW705-11	1		1.01 - 1.09	9	0.01
			1.10 - 1.90	9	0.1
			1.0 - 9.0	9	1
			10.0 - 30.0	3	10
			60	1	-