EXTERNAL MICROMETERS, MECHANICAL 966 SERIES
| 
Note: Setting gauges are not supplied as standard
with 961, 965 and 966 series micrometers.
See page 42 for our range of setting gauges.
Special Applications Micrometer available. Please contact us for full
details.
Standard: BS870, DIN 863/1, ISO361
- Capacity from 25mm -150mm
- Hardened steel or tungsten carbide measuring
faces
- 6.8mm spindle diameter
- Speeder’ type ratchet
- Locking lever
- Choice of standard or vernier type sleeve
- Adjusting key
- Supplied complete with durable plastic
case
| Capacity |
0.01mm |
0.01mm |
0.002mm |
0.002mm |
| |
Steel anvils |
Carbide anvils |
Steel anvils |
Carbide anvils |
| 25-50mm |
MW966M50 |
MW1966M50 |
MW966MB50 |
MW1966MB50 |
| 50-75mm |
MW966M75 |
MW1966M75 |
MW966MB75 |
MW1966MB75 |
| 75-100mm |
MW966M100 |
MW1966M100 |
MW966MB100 |
MW1966MB100 |
| 100-125mm |
MW966M125 |
MW1966M125 |
MW966MB125 |
MW1966MB125 |
| 125-150mm |
MW966M150 |
MW1966M150 |
MW966MB150 |
MW1966MB150 |
| |
| ACCURACY |
|
|
|
|
| Micrometer capacity |
Measuring Faces |
Measuring Faces |
Screw Pitch |
|
| max. size upto |
Flatness |
Parallelism |
Accuracy |
|
| 50mm |
0.001mm |
0.003mm |
0.003mm |
|
| 150mm |
0.001mm |
0.005mm |
0.003mm |
|
Micrometer Ball Attachments 878 SERIES
MW878M |
- Ball diameter 6.5mm
- To suit the 961, 965 and 966 series micrometers
- Can be fitted to the anvil or spindle on external micrometer
series 961, 965 and 966 to enable round or irregular surfaces
to be measured
- The ball is hardened and moves freely to allow contact with
the object being measured
Note: Always deduct the ball diameter from any reading.
Code no.
MW878M |
|
